How to make bootable USB flash drive?

Write your "How To" regarding anything you are comfortable with and you feel it will help the forum members.

NOTE :: All threads started here will appear only after the approval from Administrator
Post Reply
Nicke
Posts: 49
Joined: Mon Nov 01, 2010 9:44 pm

How to make bootable USB flash drive?

Post by Nicke »

Coming back to bootable USB guide, here we assume that you are using either Vista or Windows 7 to create a bootable USB.

1. Insert your USB (4GB+ preferable) stick to the system and backup all the data from the USB as we are going to format the USB to make it as bootable.

2. Open elevated Command Prompt. To do this, type in CMD in Start menu search field and hit Ctrl + Shift + Enter. Alternatively, navigate to Start > All programs >Accessories > right **** on Command Prompt and select run as administrator.

3. When the Command Prompt opens, enter the following command:
DISKPART and hit enter.
LIST DISK and hit enter.
Once you enter the LIST DISK command, it will show the disk number of your USB drive. In the below image my USB drive disk no is Disk 1.

4. In this step you need to enter all the below commands one by one and hit enter. As these commands are self explanatory, you can easily guess what these commands do.
SELECT DISK 1 (Replace DISK 1 with your disk number)
CLEAN
CREATE PARTITION PRIMARY
SELECT PARTITION 1
ACTIVE
FORMAT FS=NTFS
(Format process may take few seconds)
ASSIGN
EXIT
Don’t close the command prompt as we need to execute one more command at the next step. Just minimize it.

5. Insert your Windows DVD in the optical drive and note down the drive letter of the optical drive and USB media. Here I use “D” as my optical (DVD) drive letter and “H” as my USB drive letter.

6. Go back to command prompt and execute the following commands:
D:CD BOOT and hit enter. Where “D” is your DVD drive letter.
CD BOOT and hit enter to see the below message.
BOOTSECT.EXE/NT60 H:
(Where “H” is your USB drive letter)

7. Copy Windows DVD contents to USB.

You are done with your bootable USB. You can now use this bootable USB as bootable DVD on any computer that comes with USB boot feature (most of the current motherboards support this feature).
Note that this bootable USB guide will not work if you are trying to make a bootable USB on XP computer.


Sorry for my bad Englsh...:D
SHAdmin
Posts: 2093
Joined: Sat Dec 18, 2004 11:28 am
Contact:

Post by SHAdmin »

Thank you for sharing this info... 40 credits credited into your account
z327774948
Posts: 11
Joined: Mon Sep 24, 2012 1:36 am

Re: How to make bootable USB flash drive?

Post by z327774948 »

Thank you that I've make one bootable usb driver
Post Reply