"To the readers.....
The article is copyrighted by 'webexplode' and anyone who wants to use/publish this article else where must take written permission from 'webexplode'"
"----PLEASE DON'T COPY THIS. BUT, IF YOU WANT TO JUST SAVE IT IN YOUR COMPUTER YOU CAN OR ELSE RATHER ALSO JUST DISTRIBUTE AS IT IS WITHOUT ANY MODIFICATION. AND IF YOU WANT TO MAKE ANY MINOR OR MAYBE MAJOR WHICH YOU YOU RTHINK IS WRONG OR OUT DATED WITH A GENUINE REASON YOU CAN MAIL ME AT BRAT.NOVANI87@GMAIL.COM----"
THANKS FOR ALL YOUR SUPPORT AND YOUR HONESTY TOWARDS MY ARTICLES .....I HOPE IT REAMINS SAME PERHAPS IT COULD JUST BE MORE THAN THIS....
I REALLY APPRECIATE YOU'ALL..
-----------------------------------------------------------------------
Creating PDF Files
Using Only Available Free Software
(For Windows Users only)
I use to wonder if I can create a PDF file without spending too much money on the Adobe software. Also, many people have asked me how to do it and I couldn't answer them. After having done some research and some experiments myself, I came up with this trick, which will allow us to virtually convert any printable file into a PDF file.
What We Need
- Windows 95/98 CD-ROM (It has been known to work with Windows 2000/XP.)
- GSview and Ghostscript
- Adobe Acrobat Reader (Although you can use GSview to view a PDF file, the display quality of the **** viewed by Acrobat Reader is much better.)
- Create a postscript file from the **** you want to convert. (Print the **** we want to convert through a postscript printer driver to a file.)
- Convert the postscript file to a pdf file through pdfwrite device from Ghostscript.
- Install a Postscript Printer Driver
- Unless you already have a postscript printer driver installed, follow these instructions. Even if you already have one, you may add another one for pdf purpose only. You don't need to have the actual printer.
- **** Start -> Settings->Printers or double **** My Computer->Printer. Then your printer folder will show up.
- Double **** Add Printer
- In Windows 98, Add Printer Wizard window will pop up. (Windows 95 should have something similar.) **** Next.
- Choose Local printer. **** Next.
- Choose a postscript printer driver. How? Choose one with "PS" or "PostScript" attached to its name. It is a good idea to choose a color postscript printer because you might want to make a colorful PDF file. For example, HP PaintJet XL300 Postscript will do the job. I myself use to use Tektronix Phaser 220i. (There is no "PS" or "PostScript" in it, but this driver helped me first discover how to make postscript files from windows applications; however, the unprintable area for printer is quite large.) However, I recommend Tektronix Phaser 300i. It doesn't have a large unprintable area like Tektronix Phaser 220i does. Moreover, it doesn't have the color changed problem like HP PaintJet XL300 Phostscript does .
- Updated:
- Stephen has reported that HP Laserjet 8150 PS driver gives even better results. "I got better results with an HP Laserjet driver (the Laserjet 8150 PS) because my original Word **** used Garamond 12 font. This font was rendered poorly with the Textronix driver and other HP's I tried. I think the reason may be that of the ones I tried, only the 8150 used "Postscript Language Level 3"; the others used level 2 (whatever that means)."
- Thomas suggested HP Laserjet 5500 drivers work very well if you want color. "I found that the HP Color Laserjet 5500 gave excellent results - no other I found could do a large A3 colour pdf..." The driver can be downloaded here.
- Updated:
- **** Next
- Choose a printer port. (I recommend FILE but LPT1 is OK.)
- Name your printer and decide if you want it to be your default printer. **** Next.
- Choose NO for printing a test page because you don't really have one.
- **** Next and you will be prompted to insert your Windows 98/95 CD-ROM.
- Viola! You got yourself a new printer driver. Now look at your printer folder. Right **** on your new printer and choose properties.
- **** Paper tab and choose Letter unless your standard paper is different.
- **** PostScript Tab. In the PostScript output format box, choose PostScript(optimize for portability - ADSC). Note: you can also create an EPS file by choosing Encapsulated PostScript (EPS). This file can be used as an image in LaTeX.
- That's all you need to setup the printer driver. However, you can experiment with other options and see what the output will come out. **** OK when you're done.
- For more information about installing GSview and Ghostscript, visit http://www.cs.wisc.edu/~ghost/. Here I will provide only the way I did it.
- Download ****.exe (for GSview) and ****.exe (for Ghostscript) from the site.
- Install both of them. (It doesn't matter which one is installed first.)
- Open GSview and you will be prompted to choose a version of Ghostscript.
- Obtain a Adobe Acrobat Reader from Adobe web site then follow the installation instructions.
[INDENT]Now you are ready to create a PDF file. Remember, the principle is **** file->Postscript file->PDF file.
- Create a postscript file from the ****. I will show you by example. Suppose you want to create a postscript file from a word **** created by MS Word. (Other applications should follow the same pattern.)
- Open the **** with MS Word.
- **** File->Print from MS Word menu panel.
- In the Printer Name box, choose the printer you have just installed. (e.g. Tektronix Phaser 300i )
- Check Print to file box. (If you choose FILE as your printer port, this step is not necessary.)
- **** OK. Then you will be prompted to name your postscript file. **** OK to save your postscript file.
- Now you have a postscript file but the file extension is .prn. You might want to change it to .ps. If your Windows doesn't show the file extension, you may do so by opening Start->Windows Explorer. Choose View->Folder Options. **** View tab and uncheck Hide file extensions for known file types.
- Create a PDF file from the postscript file.
- Double **** your .ps file. GSview will pop up with your postscript file open.
- **** File->Convert from GSview menu panel.
- Under Device box, choose pdfwrite. Select the Resolution you want. (Normally larger resolution means larger file and better quality.) Select the pages you want to print. The option Shrink to fit Page Size from the drop-down menu might be useful sometimes. If you like, you may experiment with the properties of pdfwrite. Then **** OK.
- You will be prompted to name your PDF file. Write your file name with .pdf extension. (e.g. mydoc.pdf) **** Save and we're done.
Example pdf files created using this method are ghoststory.pdf(45 KB) and cactustek300i.pdf(346 KB). Other examples (mostly in Thai language) can be found here.
Tips
- You can make smaller and sharper PDF files if you use standard fonts (e.g. Times,Courier, Arial/Helvetica) in your **** because those fonts are "built-in" in the reader so the program won't encode the fonts into the PDF files.
- Some people have reported that the printer drivers Apple Color LW 12/660, HP Laserjet 8150 PS, HP Laserjet 5500 give even better results.
Possible Problems
Our readers have reported some problems using this method:
- Printer drivers are tied to the physical capabilities of the real printers. For example Tektronix Phaser 220i can't print beyond a certain boundary so you may not create a PDF file beyond that boundary using that printer driver. Some printers won't print color when the paper is large so you can't create a color PDF file using those printer drivers if you choose large paper.
- Some advanced features such as hyper links are not supported by this method.
- If you use HP PaintJet XL300 Phostscript with your MS **** that contains non-vector graphic pictures (e.g. jpgs or gifs), you might experience color changed in the graphic. (See cactushp.pdf (414 KB).) I suggest using Tektronix Phaser 300i instead. The "Tektronix Phaser 300i" version of cactushp.pdf is cactustek300i.pdf(346 KB).
- There was a report that this method (or just the printer Tektronix Phaser 300i) doesn't work well with MS Publisher. For examples, some photo and text box are missing in the pdf file. And the pdf file contains only the first page while the original **** has more than one page. If you don't have that problem or if you can fix the problem, please describe how you do it in my forum. Thanks a bunch. Updated: Some have reported that HP Color LaserJet printer driver would solve some problems, but still could not solve the multiple page problem.
